ALink Main Panel

ACCESS

This is a example of one of the access system we will install
Doors32 Software To successfully run Doors32™ for use with Windows™ Software the host computer must meet the following minimum requirements.

PC compatible computer using a Pentium-90 or faster microprocessor minimum of 16 MB of system RAM (the larger the cardholder database, the larger the RAM should be)
SVGA colour monitor with SVGA graphics card (800 x 600 minimum resolution)
3.5 inch diskette drive, keyboard, mouse (or other pointing device)
100 MB of hard disk space
CD-ROM
COM port with a 16550 UART to support an external modem or direct RS-232 serial connection, or an internal modem (modems must be 9600 baud or greater)
Windows 95, Windows 98, Windows 2000, Windows ME, or Windows NT v4.0 or greater

To run Doors32™, the firmware on all PXL-250 Controllers must be at revision 6.3.21 or greater.
The following software is available for download. Installation options allow this software to be installed as fully operational software or as demonstration software. Download times are based on a 28.8 KB modem. Doors32™ for use with Windows™ Software v3.63 21 MB download - 1 hour 42 minutes NOTE: To enable all of the new features, this software requires that all controllers have revision 6.3.49 firmware. Controllers with older firmware revisions cannot
access these new features. Doors32™ Demonstration Software Tutorial Manual 520 KB download - 3 minutes Doors32™ Users Guide 4 MB download - 19 minutes Doors32™ Installation Guide 530 KB download - 3 minutes